D-Link DES-3550 Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 192

D-Link DES-3550 Скачать руководство пользователя страница 29

DES-3550 Layer 2

Fast Ethernet Switch User’s Guide

29

Password Protection

The DES-3550 does not have a default user name and password. One of the first tasks when
settings up the Switch is to create user accounts. If you log in using a predefined
administrator-level user name, you have privileged access to the Switch’s management
software.

After your initial login, define new passwords for both default user names to prevent
unauthorized access to the Switch, and record the passwords for future reference.

To create an administrator-level account for the Switch, do the following:

1. At the CLI login prompt, enter

create account admin

followed by the <user

name> and press the Enter key.

2. You will be asked to provide a password. Type the <password> used for the

administrator account being created and press the Enter key.

3. You will be prompted to enter the same password again to verify it. Type the

same password and press the Enter key.

4. Successful creation of the new administrator account will be verified by a

Success

message.

User names and passwords can be up to 15 characters in
length.

The sample below illustrates a successful creation of a
new administrator-level account with the user name “newmanager.”

DES-3550:4#create account admin newmanager
Command: create account admin newmanager

Enter a case-sensitive new password:********
Enter the new password again for confirmation:********

Success.

DES-3550:4#

SNMP Settings

Simple Network Management Protocol (SNMP) is an OSI Layer 7 (Application Layer)
designed specifically for managing and monitoring network devices. SNMP enables network
management stations to read and modify the settings of gateways, routers, switches, and other

NOTE:

Passwords

are case sensitive.

NOTICE:

CLI configuration commands only modify the running

configuration file and are not saved when the Switch is rebooted. To save
all your configuration changes in nonvolatile storage, you must use the

save

command to copy the running configuration file to the startup

configuration.

«
...
27
28
29
30
31
...
»

Содержание DES-3550

































































































































































































Отзывы:

Нет отзывов