D-Link DES-3550 Скачать руководство пользователя страница 174 | Manualshive

Страница: 174 / 192

D-Link DES-3550 Скачать руководство пользователя страница 174

DES-3550 Layer 2

Fast Ethernet Switch User’s Guide

174

Device Name

This field will display the Device Name of the switches in the SIM group
configured by the user. If no Device Name is configured by the name, it will
be given the name default and tagged with the last six digits of the MAC
Address to identify it.

Local Port

Displays the number of the physical port on the CS that the MS or CaS is
connected to. The CS will have no entry in this field.

Speed

Displays the connection speed between the CS and the MS or CaS.

Remote Port

Displays the number of the physical port on the MS or CaS that the CS is
connected to. The CS will have no entry in this field.

MAC Address

Displays the MAC Address of the corresponding Switch.

Model Name

Displays the full Model Name of the corresponding Switch.

Click

Close

to close the

Property

window.

Menu Bar

The Single IP Management window contains a menu bar for device configurations, as seen
below.

Figure 10- 17. Menu Bar of the Topology View

The five menus on the menu bar are as follows.

File

Print Setup -

Will view the image to be printed.

Print

Topology

- Will print the topology map.

Preference

- Will set display properties, such as polling interval, and the views to

open at SIM startup.

Group

Add to group

- Add a Candidate to a group. Clicking this option will reveal the

following screen for the user to enter a password for authentication from the Candidate Switch
before being added to the SIM group. Click

OK

to enter the password or

Cancel

to exit the

window.

«
...
172
173
174
175
176
...
»

Содержание DES-3550

































































































































































































Отзывы:

Нет отзывов