D-Link DES-3550 Скачать руководство пользователя страница 126 | Manualshive

Страница: 126 / 192

D-Link DES-3550 Скачать руководство пользователя страница 126

DES-3550 Layer 2

Fast Ethernet Switch User’s Guide

126

Local Enable Password

This window will configure the locally enabled password for the

Enable Admin

command.

When a user chooses the “

Local_Enable

” method to promote user level privileges to

administrator privileges, he or she will be prompted to enter the password configured here that
is locally set on the Switch.
To view the following window, click

Management > Access Authentication Control >

Local Enable Password

:

Figure 7- 17. Configure Local Enable Password window

To set the

Local Enable Password

, set the following parameters and click

Apply

.

Parameter

Description

Old Local Enabled

If a password was previously configured for this entry, enter it here in order
to change it to a new password.

New Local Enabled

Enter the new password that you wish to set on the Switch to authenticate
users attempting to access Administrator Level privileges on the Switch. The
user may set a password of up to 15 characters.

Confirm Local
Enabled

Confirm the new password entered above. Entering a different password
here from the one set in the New Local Enabled field will result in a fail
message.

Enable Admin

This window is for users who have logged on to the Switch on the normal user level, and wish
to be promoted to the administrator level. After logging on to the Switch, users will have only
user level privileges. To gain access to administrator level privileges, the user will open this
window and will have to enter an authentication password. Possible authentication methods
for this function include

TACACS/XTACACS/

, user defined server groups, local

enable (local account on the Switch), or no authentication (none). Because XTACACS and
TACACS do not support the enable function, the user must create a special account on the
server host, which has the username “enable”, and a password configured by the administrator
that will support the “enable” function. This function becomes inoperable when the
authentication policy is disabled.

To view the following window, click

Management > Access Authentication Control >

Enable Admin:

«
...
124
125
126
127
128
...
»

Содержание DES-3550

































































































































































































Отзывы:

Нет отзывов