D-Link DES-3550 Скачать руководство пользователя страница 161 | Manualshive

Страница: 161 / 192

D-Link DES-3550 Скачать руководство пользователя страница 161

DES-3550 Layer 2

Fast Ethernet Switch User’s Guide

161

Once the switch configuration settings have been saved to NV-RAM, they become the default
settings for the Switch. These settings will be used every time the Switch is rebooted.

Reboot Services

The following section will aid the user in rebooting and resetting the Switch using the
following windows, described in detailed.

Reboot Device

The following window is used to restart the Switch.
All of the configuration information, entered from the last time

Save Changes

was executed,

will be lost. Click the

Reboot

button to restart the Switch.

Figure 9- 9. Reboot window

Reset

The

Reset

function has several options when resetting the Switch. Some of the current

configuration parameters can be retained while resetting all other configuration parameters to
their factory defaults.

Reset

gives the option of retaining the Switch’s User Accounts and History Log while

resetting all other configuration parameters to their factory defaults. If the Switch is reset with
this option enabled, and

Save Changes

is not executed, the Switch will return to the last saved

configuration when rebooted.

Figure 9- 10. Reset window

In addition, the

Reset System

option is added to reset all configuration parameters to their

factory defaults, save these parameters to the Switch’s non-volatile RAM, and then restart the
Switch. This option is equivalent to

Reset Config

(above) followed by

Save Changes

.

NOTE:

Only the

Reset System

option will enter the factory default

parameters into the Switch’s non-volatile RAM, and then restart the
Switch. All other options enter the factory defaults into the current
configuration, but do not save this configuration.

Reset System

will

return the Switch’s configuration to the state it was when it left the
factory.

«
...
159
160
161
162
163
...
»

Содержание DES-3550

































































































































































































Отзывы:

Нет отзывов