D-Link DES-3226L Скачать руководство пользователя

Страница: 38 / 128

D-Link DES-3226L Command Line Reference

show monitor session 1

This command displays the port monitoring information for a particular mirroring session.

Note:

The <session-id> parameter is an integer value used to identify the session. In the cur-
rent version of the software, the <session-id> parameter is always 1.

Format

show monitor session <session-id>

Mode

Privileged EXEC

Session ID

It is an integer value used to identify the session.

Monitor Session Mode

It indicates whether the Port Mirroring feature is enabled or dis-

abled for the session identified with <session-id>. The possible values are
Enabled and Disabled.

Probe Port

It is the probe port (destination port) for the session identified with <session-
id>. If probe port is not set, this field is blank.

List of Source Ports

It is the list of ports, which are configured as mirrored ports (source

ports) for the session identified with <session-id>. If no source port is config-
ured for the session then this field is blank.

shutdown

This command disables a port.

Default

enabled

Format

shutdown

Mode

Interface Config

no shutdown

This command enables a port.

Format

no shutdown

Mode

Interface Config

shutdown all

This command disables all ports.

Default

enabled

Format

shutdown all

Mode

Global Config

no shutdown all

This command enables all ports.

Format

no shutdown all

Mode

Global Config

Содержание DES-3226L

































































































































Результаты поиска

Содержание DES-3226L

Отзывы:

Похожие инструкции для DES-3226L

Бренды по названию

Популярные бренды

D-Link DES-3226L, Справочник команд интерфейса командной строки

Результаты поиска

Содержание DES-3226L

Отзывы:

Похожие инструкции для DES-3226L

Бренды по названию

Популярные бренды