D-Link DES-3226L, Справочник команд интерфейса командной строки

Страница: 113 / 128

System Maintenance Commands 113
Number of Traps since last reset
The number of traps that have occurred since the last
reset of this device.
Number of Traps since log last displayed
The number of traps that have occurred since
the traps were last displayed. Getting the traps by any method (terminal inter-
face display, Web display, upload file from switch etc.) will result in this
counter being cleared to 0.
Log
The sequence number of this trap.
System Up Time
The relative time since the last reboot of the switch at which this trap
occurred.
Trap
The relevant information of this trap.
Note: Trap log information is not retained across a switch reset.
show mac-addr-table
This command displays the forwarding database entries. If the command is entered with no parameter,
the entire table is displayed. This is the same as entering the optional
all
parameter. Alternatively, the
administrator can enter a MAC Address to display the table entry for the requested MAC address and all
entries following the requested MAC address.
Format
show mac-addr-table [<macaddr> | all]
Mode
Privileged EXEC
Mac Address
A unicast MAC address for which the switch has forwarding and or filtering
information. The format is 6 or 8 two-digit hexadecimal numbers that are sep-
arated by colons, for example 01:23:45:67:89:AB. In an IVL system the MAC
address will be displayed as 8 bytes.
Interface
The port which this address was learned.
Interface Index
This object indicates the ifIndex of the interface table entry associated with
this port.
Status
The status of this entry. The meanings of the values are:
Static
The value of the corresponding instance was added by the system or a user
when a static MAC filter was defined. It cannot be relearned.
Learned
The value of the corresponding instance was learned by observing the source
MAC addresses of incoming traffic, and is currently in use.
Management
The value of the corresponding instance (system MAC address) is also the
value of an existing instance of dot1dStaticAddress. It is identified with inter-
face 0/1.
Self
The value of the corresponding instance is the address of one of the switch’s
physical interfaces (the system’s own MAC address).
Other
The value of the corresponding instance does not fall into one of the other cat-
egories.