manualshive.com logo in svg

D-Link DES-3226L, Справочник команд интерфейса командной строки

Поделиться
Скачать
D-Link DES-3226L Скачать руководство пользователя страница 53

Switching Commands

53

Mode  

Global Config

Participation options are: 

include  

The interface is always a member of this VLAN. This is equivalent to regis-
tration fixed.

exclude  

The interface is never a member of this VLAN. This is equivalent to registra-
tion forbidden.

vlan port acceptframe all

This command sets the frame acceptance mode for all interfaces. The modes are defined as follows:

z

VLAN Only mode - Untagged frames or priority frames received on this interface are discarded. 

z

Admit All mode - Untagged frames or priority frames received on this interface are accepted and 
assigned the value of the interface VLAN ID for this port. 

With either option, VLAN tagged frames are forwarded in accordance with the IEEE 802.1Q VLAN 
Specification.

Default  

admit all

Format   

vlan port acceptframe all {vlanonly | all} 

Mode   

Global Config

no vlan port acceptframe all

This command sets the frame acceptance mode for all interfaces to Admit All. For Admit All mode, 
untagged frames or priority frames received on this interface are accepted and assigned the value of the 
interface VLAN ID for this port. With either option, VLAN tagged frames are forwarded in accordance 
with the IEEE 802.1Q VLAN Specification.

Format  

no vlan port acceptframe all 

Mode   

Global Config

vlan port pvid all

This command changes the VLAN ID for all interface.

Default  

1

Format  

vlan port pvid all <1-4094>

Mode  

Global Config

no vlan port pvid all

This command sets the VLAN ID for all interfaces to 1.

Format  

no vlan port pvid all 

Mode  

Global Config

Содержание DES-3226L

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды