D-Link DES-3226L Скачать руководство пользователя страница 94

Страница: 94 / 128

D-Link DES-3226L Command Line Reference

If the optional parameter 'statistics

slot/port

' is used, the dot1x statistics for the specified port are

displayed.

Port

The interface whose statistics are displayed.

EAPOL Frames Received

The number of valid EAPOL frames of any type that have

been received by this authenticator.

EAPOL Frames Transmitted

The number of EAPOL frames of any type that have been

transmitted by this authenticator.

EAPOL Start Frames Received

The number of EAPOL start frames that have been

received by this authenticator.

EAPOL Logoff Frames Received

The number of EAPOL logoff frames that have been

received by this authenticator.

Last EAPOL Frame Version

The protocol version number carried in the most recently

received EAPOL frame.

Last EAPOL Frame Source

The source MAC address carried in the most recently

received EAPOL frame.

EAP Response/Id Frames Received

The number of EAP response/identity frames that

have been received by this authenticator.

EAP Response Frames Received

The number of valid EAP response frames (other than

resp/id frames) that have been received by this authenticator.

EAP Request/Id Frames Transmitted

The number of EAP request/identity frames that

have been transmitted by this authenticator.

EAP Request Frames Transmitted

The number of EAP request frames (other than

request/identity frames) that have been transmitted by this authenticator.

Invalid EAPOL Frames Received

The number of EAPOL frames that have been

received by this authenticator in which the frame type is not recognized.

EAP Length Error Frames Received

The number of EAPOL frames that have been

received by this authenticator in which the frame type is not recognized.

show dot1x users

This command displays 802.1x port security user information for locally configured users.

Format

show dot1x users

slot/port

Mode

Privileged EXEC

User

Users configured locally to have access to the specified port.

show users authentication

This command displays all user and all authentication login information. It also displays the
authentication login list assigned to the default user.

Format

show users authentication

Mode

Privileged EXEC

Содержание DES-3226L

































































































































Результаты поиска

Содержание DES-3226L

Отзывы:

Бренды по названию

Популярные бренды

D-Link DES-3226L, Справочник команд интерфейса командной строки

Результаты поиска

Содержание DES-3226L

Отзывы:

Бренды по названию

Популярные бренды