D-Link DES-3226L, Справочник команд интерфейса командной строки

Страница: 119 / 128

System Maintenance Commands 119
physical path between the switch and the workstation. The terminal interface sends three pings to the
target station.
Format
ping <ipaddr>
Modes
Privileged EXEC
User EXEC
reload
This command resets the switch without powering it off. Reset means that all network connections are
terminated and the boot code executes. The switch uses the stored configuration to initialize the switch.
You are prompted to confirm that the reset should proceed. The LEDs on the switch indicate a
successful reset.
Format
reload
Mode
Privileged EXEC
copy
This command uploads and downloads files to and from the switch. You can specify local URLs using
tftp or xmodem. You can specify one of the following four files as the source file for uploading from the
switch: startup configuration (
nvram:startup-config
), error log (
nvram:errorlog
), trap log
(
nvram:traplog
) and configuration script (
nvram:script <scriptname>
). Specify a URL (tftp://
<ip address>/<filepath>/<filename>) for the destination.
Use the
copy
command to download the startup configuration, code image or configuration script by
specifying the source URL and destination as
nvram:startup-config
,
system:image
or
nvram:script,
respectively. During the download of a configuration script, the
copy
command
validates the script. In case of any error, the command lists all the lines at the end of the validation
process and prompts you to confirm before copying the script file.
Use the
copy
command to download secure shell (ssh) key files, including
nvram:sshkey-rsa,
nvram:sshkey-rsa2
, and
nvram:sshkey-dsa
. See “Secure Shell (SSH) Commands” on page 100
for more information.
Use the
copy
command to download HTTP secure-server certificates, including
nvram:sslpem-
root
,
nvram:sslpem-server
,
nvram:sslpem-dhweak
, and
nvram:sslpem-dhstrong
. For more
information, see “Hypertext Transfer Protocol (HTTP) Commands” on page 102.
Use the
copy
command to save the running configuration to nvram by specifying the source as
system:running-config
and the destination as
nvram:startup-config
.
Default
none
Format
copy nvram:startup-config <tftp://<ipaddr>/<filepath>/<filename>>
copy nvram:errorlog <tftp://<ipaddr>/<filepath>/<filename>>
copy nvram:script <scriptname> <tftp://<ipaddr>/<filepath>/<filename>>
copy nvram:traplog <tftp://<ipaddr>/<filepath>/<filename>>
copy system:running-config nvram:startup-config
copy <tftp://<ipaddr>/<filepath>/<filename>> nvram:clibanner
copy <tftp://<ipaddr>/<filepath>/<filename>> nvram:script
copy <tftp://<ipaddr>/<filepath>/<filename>> nvram:sshkey-dsa
copy <tftp://<ipaddr>/<filepath>/<filename>>nvram:sshkey-rsa1
copy <tftp://<ipaddr>/<filepath>/<filename>> nvram:sshkey-rsa2