80
D-Link DES-3226L Command Line Reference
The default traffic shaping value is 0, meaning no upper limit is enforced, which allows the interface to
transmit up to its maximum traffic rate.
Default
0
Format
traffic-shape {<0-100> | rate <0-10000000>}
Modes
Global Config
Interface Config
Note:
The value is independent of any per-queue maximum bandwidth value(s) in effect for
the interface and should be considered as a second-level transmission rate control
mechanism that regulates the output of the entire interface regardless of which queues
originate the outbound traffic.
no traffic-shape
This command restores the egress port speed to the default value.
Format
no traffic-shape
Modes
Global Config
Interface Config
rate-limit
This command allows you to limit the rate of ingress traffic arriving on the port. You can set the rate on
a per-port basis or on all ports. The
<0-100>
value is the percentage of bandwidth to limit. For
example, a value of 20 means that the port speed for ingress traffic is at 20% of the maximum rate. The
<rate 0-10000000>
value is the absolute bandwidth value in increments of 64 kbps.
The default ingress rate shaping value is 0, meaning no upper limit is enforced, which allows the port to
accept up to its maximum traffic rate.
Default
0
Format
rate-limit {<0-100> | rate <0-10000000>}
Modes
Global Config
Interface Config
no rate-limit
This command restores the ingress port speed to the default value.
Format
no rate-limit
Modes
Global Config
Interface Config
show classofservice dot1p-mapping
This command displays the current Dot1p (802.1p) priority mapping to internal traffic classes for a
specific interface. The slot/port parameter is optional and is only valid on platforms that support
independent per-port class of service mappings. If specified, the 802.1p mapping table of the interface is
displayed. If omitted, the most recent global configuration settings are displayed.
Format
show classofservice dot1p-mapping [
slot/port
]
Содержание DES-3226L
