DAP-1155
Wireless N150 Access Point & Router
User Manual
Configuring Device
Parameter
Description
Private port (begin)/
Private port (end)
A port of the IP address specified in the
Private IP
field to which
traffic is directed from the
Public port
. Specify the start and the
end value for the port range. If you need to specify one port, enter
the needed value in the
Private port (begin)
field and leave the
Private port (end)
field blank.
Private IP
Enter the IP address of the server from the local area network. To
choose a device connected to the
access point
's LAN at the moment,
select the relevant value from the drop-down list (the field will be
filled in automatically).
Remote IP
Enter the IP address of the server from the external network.
Enable NAT Loopback
If the checkbox is selected, users of the
access point
's LAN can
access the server, which IP address is specified in the
Private IP
field, using the
access point
's external IP address as the server's IP
address. If a DDNS service is configured on the
Advanced /
DDNS
page, the users can access the server via the device's domain
name.
When needed settings are configured, click the
Apply
button.
After clicking the
Apply
button, a dialog box appears.
If you are going to create a new virtual server, click the
OK
button. After clicking the button, the
Firewall / Virtual servers
section, page 134, for a detailed
description of the elements from the page).
If you are not going to create a new virtual server, click the
Cancel
button. After clicking the
button, the
Home / Information
page opens.
Page
62
of 158