35
20
AERO-20A
units - As the axis of the vertical center of gravity coincides
with the point 20, we can fly 20 units with that configuration.
For example, lets take a system of 16
AERO- 20A
units. If we consult the
panel lettering of the
AX-AE20
, we observe that 16 units can be flown when
the vertical axis of the center of gravity is aligned with any of the 21 hanging
positions.
In the simulation attached, the system is flown at 10 meters with -6.98º of
inclination. No warning of maximum load appears.
The warnings of maximum load appear ONLY if the number of cabinets is
greater than 19 units. For more than 19 units, the warnings of load appear and
we should check where the vertical axis of the center of gravity for the system
is situated.
See what happens if we add four more boxes.
Now we have a total of 20
AERO-20A
units and the
software warns us that only 20 units from point 2 at
20 can be flown.
In this case, we have -6.98° of inclination, the
vertical axis of the center of gravity of the system is
positioned in alignment with the pick-up point
number 20. In this case, we are within the safety
margins. Remember that from point 2 to point 20,
20 units can be flown (see above panel drawing
AX-
AE20
).
Manual de Colgado
/ aero series /
Rigging Manual
