22
DETAIL
Now, we shall give the two lateral pins of the platform a half turn
as shown in the below figure (1).
This will allow us to release the tray of the platform (2) and raise it.
Align the front holes of the tray and the enclosure, and link them
with two security pins (3).
Then we will go down the array until it rests on
the platform (4).
Be very careful with this
operation to avoid accidents. Use personal
safety elements required as safety shoes,
gloves, etc.
We will turn the lateral pins of the platform so
that the tray is blocked and, finally, place the
security pins in the REAR LINK holes (5).
4
5
1
2
3
3
1
These lateral pins
release the tray
from the platform
Manual de Colgado
/ aero series /
Rigging Manual
