34
AX-AE20
modular flybar set is comprised of two side panels of steel and aluminum and a
central crossbar (
PICKUP-AX-AE20
).
The maximum load capacity is
20 units *
(pick-up point dependent) with a 5:1 safety factor.
For systems of 12 units or more, an additional bar should be added and the array will hang
from two lift motors for greater security and control over the angle of the system at all times.
AERO-20A
load limitation: * On the side panels the maximum number of units that can be flown
are screen printed depending on the pick-up point marked by the software (or vertical axis of the
center of gravity of the system). Consulting the
EASE Focus 2
software we will determine the number
of units which can be flown from each pick-up point.
AX-AE20
pick-up point
maximum
number of units
These limitations depend on the load of the vertical axis position of the center of
gravity of the system:
From points 2 to 20 regardless of whether you use a motor or two, a maximum of
20
AERO-20A
units can be flown.
At point 1, 19 units of
AERO-20A
can be flown.
At point 21, 19 units of
AERO-20A
can be flown.
Pick-up point - vertical axis of the center of gravity
pick-up
point
ANNEX II :
Maximum load capacity for AX-AE20
In the image at the right you can see the vertical axis of the center
of gravity for the system passing through the pick-up point number
11.
The pick-up point shown in the software is placed in alignment
with the vertical axis of the center of gravity for the system. The
position of this vertical axis obviously depends on the number of
boxes, the angle between them and full vertical angle. The loading
limitations are displayed by the software and depend on the vertical
axis that position the center of gravity.
Manual de Colgado
/ aero series /
Rigging Manual
