10
Now we should unlock the angle in the fourth enclosure to place it on the third (in this configuration the
rear trigger is hidden, as seen on page 7).
To do this we will move the handles on the sides of the enclosure up to the end where you will hear a
click.
At that time the rear trigger will come out, the moved handle will be locked and it will unlock the angle.
Taking the fourth enclosure by the handles, we will lower it gently upon the third enclosure, until it rests
upon it.
Remove the safety pins on each side of the box and to anchor the enclosure we will use these pins as
shown in the figures, on page 7.
Once the fourth enclosure is supported by the third and the front safety pins are positioned, we will
choose also 7º with the angle selector and we will put the rear safety pins on the second enclosure (two on
each side of the enclosures): put pins in REAR LINK holes of fourth enclosure and others, in the holes
corresponding to 7º angle, on the third enclosure (as shown in the figures below and as seen on page 8).
Check that all safety pins are located correctly because they will have to withstand the weight of all the
enclosures.
These figures show final mounting of four
enclosures on a
PL-20S
platform.
Do not stack more than four boxes so as
not to endanger stability.
Manual de Colgado
/ aero series /
Rigging Manual
