CY8CKIT-030 PSoC® 3 Development Kit Guide, Doc. # 001-61038 Rev. *J
9
2.
Getting Started
This chapter describes how to install and configure the PSoC 3 Development Kit. The
Kit
Operation chapter on page 11
explains how to program a PSoC 3 device with PSoC Programmer
and use the kit with the help of a code example. To reprogram the PSoC device with PSoC Creator,
see the installation instructions for PSoC Creator. The
Hardware chapter on page 14
details the
hardware operation. The
Code Examples chapter on page 30
provides instructions to create a
simple code example. The Appendix section provides the
Schematics
,
Board Layout
,
Bill of
Materials (BOM)
and other useful information regarding the PSoC 3 Development Kit.
2.1
DVD Installation
Follow these steps to install the PSoC 3 Development Kit software:
1. Insert the kit DVD into the DVD drive of your PC. The DVD is designed to auto-run and the kit
menu appears.
Figure 2-1. Kit Menu
Note
If auto-run does not execute, double-click
cyautorun.exe
on the root directory of the DVD.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from