CYP DS-VWC2-4K22, Руководство по эксплуатации

Страница: 49 / 100

43
take a few seconds to fully update with the new configuration. In most
cases it will take multiple adjustment and tweaking passes to perfectly
match the physical layout.
It is recommended to periodically save the modifications that have been
made to the current layout by right clicking on the custom layout on the
right and selecting “Update”. This will save the changes to that layout,
so that they are not lost if you close the software, or change to another
layout.
Note: Making changes to a layout and then switching to a new layout
without updating the layout will cause those changes to be lost.
1) Unit Information and Details: This section displays all of the relevant
position, dimension, and orientation details of the selected unit/
display. These changes will occur immediately.
Note: Only the most recently selected unit’s details will be displayed if
multiple units are currently selected.
„
ID: The ID number of the currently selected unit/display.
„
Left/Top/Width/Height: Displays the current values for the pixel
position of the top/left corner of the un-rotated display as well as
the current width and height in pixels. After changing any of these
values, press the enter key to commit the change to the layout.
Note: If the bezel values are set to 0, the height and width values
should only be the measurement of the video panel within the display.