CYP DS-VWC2-4K22, Руководство по эксплуатации

Страница: 34 / 100

28
number indicating their order to be added to the layout. If you wish
to re-order the units, type new ID numbers next to each unit and
click “Arrange”. To remove an individual unit from the list, click the “X”
next to it’s name. To remove all units, click the “Clear” button.
After all desired displays have been added to the layout, each display
must be connected to so that they may be controlled. If some displays
that need to be a part of the layout are not currently available for
connection, dummy monitors may be added in their place by pressing
the “+” button. Displays that are no longer a part of the layout may also be
disconnected, or removed completely. Each display can be connected or
disconnected individually, or as a group.
2) Connect Button: Clicking the “Connect” button will activate the
software’s connection to all currently selected units, allowing control
and configuration of those units. To connect a display to only a single
unit, right click on the display’s number and select “Connect” from the
dropdown menu.
3) Disconnect Button: If you want to ensure that no additional settings
are sent to the units, click the “Disconnect” button and all selected
units will be disconnected from the software. To disconnect a single
unit from a display, right click on the display’s number and select
“Disconnect” from the dropdown menu.
Note: Disconnected units will still be shown in the layout, but the “Get”,
“Set”, and “Setting” functions will not be available.
4) +/− Buttons: To add dummy units (displays with no physical unit
currently connected) to a layout, click the “+” button. To completely