CYP DS-VWC2-4K22, Руководство по эксплуатации

Страница: 36 / 100

30
automatically reboot.
„
Factory Reset Button: Selecting this will reset the unit’s settings
back to their factory defaults.
2) Network Configuration: The IP address, netmask and gateway can be
set manually, or DHCP can be enabled for automatic IP configuration if
your local network supports it. Click on “Apply” to confirm and activate
any changes made to these settings. To return these settings to their
factory defaults, click on the “Default” button.
6.5.4 I/O Configuration
The “I/O” tab provides control over basic input and output functions such
as audio mute, EDID selection, HDCP behavior, OSD display management,
and the custom logo overlay. To return these settings to their factory
defaults, click on the “Default” button. Changes made to these settings
will occur immediately.
1) Audio Mute: Enables or disables muting the audio output.
2) User EDID: To upload a custom User EDID, insert a USB thumb drive,
with a valid EDID file named “EDID_USER_*.BIN” in the root directory,
into the unit’s USB service port then click the “Update” button.
3) In 1~2 EDID Mode: Select the preferred EDID for the unit to use for
each input from the dropdown menu (1080P60 2CH, 4KP30 2CH,
4KP60 2CH, User 1~4, and Sink).
4) In 1~2 HDCP Mode: Select the HDCP behavior for each input.
„
Support Off: Completely disables support for HDCP on that input.