CYP DS-VWC2-4K22, Руководство по эксплуатации

Страница: 41 / 100

35
Note: After changing resolutions, windows will automatically adjust to
maintain their proportional sizes.
2) Warping Mode/Scaling Mode: Press either of these buttons at the
top of the tab to switch the unit’s operational mode between Warping
mode and Scaling mode. The change will occur immediately.
3) Preset Column: This column on the right side of the tab contains
all available Scaling Mode presets. Most presets are dual-window
modes, however selecting the “Switch” preset will limit the output to
a single, full screen, window that cannot be resized and the central
options available on the left side of the tab will split into the “Normal”
and “Effect” sub-tabs shown below which add chroma key and
transition controls. After selecting a new preset, the change will occur
immediately. Presets 1~4 are user presets and can be customised.
Right-click on a user preset and select "Update" to assign the current
window arrangement and routing to that preset.
4) Window Information and Details: This section displays all of the
relevant position and dimension details of the selected window.
Note: Only one unit’s details will be displayed if multiple units are currently
selected.
„
ID: Displays the ID number of the currently selected window.
„
Left/Top: Sets the X and Y coordinate position of the upper left
corner of the currently selected window. Click on the “Set” button,
after making changes, to make them active.
„
Width/Height: Set the horizontal and vertical size of the currently
selected window. Click on the “Set” button, after making changes,
to make them active.
Note: Left/Top/Width/Height are not adjustable in the Switch preset.
5) Get: Click this button to download the unit’s current window settings
into the software.
6) Set: Click this button to save all current window settings to the active
preset.