LATCH STORAGE:
1. Raise Headrest to its highest position and unbuckle harness.
2. If LATCH Strap is in the Rear-Facing Belt Path, grab both ends of LATCH Strap.
Slide LATCH Strap to red
FORWARD-FACING
opening on both sides.
3. Route each LATCH Connector through the Forward-Facing Belt Path openings.
For easier access, lift up the Seat Cover on the back of the seat.
4. Attach both LATCH Connectors to
the LATCH Storage Hooks
a
located
behind the backrest.
5. Lower Seat Cover and adjust
Headrest to proper height for your
child.
TETHER STORAGE:
6. Store Tether in the compartment
b
in
the back of Child Restraint, as shown,
when not using the Child Restraint
forward-facing. Always use the Tether
when installing this Child Restraint
forward-facing if your vehicle is
equipped with a Tether anchor.
Make sure
compartment door
is properly closed.
Always make sure LATCH System Components are properly stored in
the compartments when not in use.
Always make sure LATCH System Components are properly stored in
the compartments when not in use.
1
2
3
4
16
15
AR
MP
IT
LE
VE
L
1 2 3 4 5 6 7 8 9 10
b
a
6
1 2 3 4 5 6 7 8 9 10
LATCH SYSTEM STORAGE
LATCH SYSTEM STORAGE
EN
