CYBEX Arc Trainer 600A, Руководство по эксплуатации для владельца

Страница: 43 / 107

5 - Setup & Assembly
Warnings/Cautions
All warnings and cautions listed in this chapter are as follows:
! WARNING: Use extreme caution when assembling the unit. Failure to do
so could result in injury.
! CAUTION: A minimum of two people are required to lift, move and
assemble this unit. Always use proper lifting methods when
moving heavy items.
! WARNING: Be sure that all electrical requirements are met as indicated
in the specifications at the front of the manual and at the
beginning of this chapter prior to proceeding.
! WARNING: Wait until all moving parts come to a complete stop before
dismounting.
Choosing & Preparing a Site
Before assembling the unit you must select a suitable site and have the proper
electrical outlet power available for optimum operation and safety. See the
Electrical Power Requirements section (located on the next page) for direction
in locating your voltage requirements.
The area you select for the unit should be well lit and well ventilated. Locate
the unit on a structurally sound and level surface. Allow enough clearance for
safe access and passage during use of the unit. Allow a minimum of 5” (13 cm)
behind the unit for the elevation to rise. If the unit is to be located above the
first floor, place it near or above major support beams. To protect the carpeting,
place a 3/4” (1.9 cm) thick wood base under the unit. Be sure to use the rubber
foot covers shown on page 5-7.
Do not install the unit in an area of high humidity, such as in the vicinity of a
steam room, sauna, indoor pool, or outdoors. Exposure to extensive water
vapor, chlorine, and/or bromine could adversely affect the electronics as well as
other parts of the machine.
Cybex Arc Trainer Owner’s & Service Manual
Page 5-1
Table of Contents . . . . . . . . . iii
Service Schedule. . . . . . . . . 4-6
Warnings/Cautions . . . . . . . 5-1
Choosing & Preparing a Site 5-1
Electrical Power
Requirements . . . . . . . . . . 5-2
Assembling the Cybex
Arc Trainer . . . . . . . . . . . . . 5-2
Testing the Operation . . . . . . 5-9
Setting Operation Options. . 5-10