CYBEX gold CLOUD Q with SensorSafe, Руководство пользователя

Страница: 9 / 62

• WEIGHT IS BETWEEN 4—35 LB (1.8—15.9 KG)
AND
• HEIGHT IS LESS THAN 30 INCHES (76 CM)
AND
• TOP OF CHILD'S HEAD IS A MINIMUM OF 1 INCH (2.5 CM)
BELOW THE TOP OF THE INFANT CARRIER.
REAR FACING IS SAFEST
Following the American Academy of Pediatrics' recommendations for safe
transportation of infants, we recommend keeping your child rear facing in a properly
installed car seat until they outgrow the maximum weight or height for the seat. Visit
www.aap.org for more information on the Academy's recommendation.
Use the CYBEX Cloud Q until your child reaches the maximum weight or height limits. Because not
all children have the same shapes and sizes, DO NOT USE the Cloud Q when the top of the child's
head is less than 1 inch (2.5 cm) from the top of the Infant Carrier. This allows for proper protection
during a crash.
After your child outgrows the Cloud Q, keep your child rear-facing in a convertible or all-in-one seat
as long as the seat allows, according to the manufacturer's specifications, before turning them around
to ride Forward Facing.
DO NOT USE THIS CHILD RESTRAINT IF YOUR CHILD
DOES NOT MEET ALL OF THESE REQUIREMENTS:
CYBEX LINEAR SIDE-IMPACT
PROTECTION (LSP) SYSTEM
A unique telescoping blocker arm,
combined with deep side wings lined with
thick energy-absorbing EPS foam and an
adjustable headrest creates the CYBEX
LSP System. This system has been
optimized to protect and greatly reduce
any forces on your baby in the event of a
side impact crash.
LOAD LEG
The European style Load Leg prevents
the seat from rotating forward, allowing
the seat to perfectly support the baby’s
head, neck, and body. It also transfers
much of the energy to the vehicle’s
floor, decreasing forces on your baby
up to 50%!
NO RETHREAD HARNESS
The no rethread harness adjusts the
harness height through eleven positions
without the need for rethreading.
SUPER EASY AND TIGHT™
(SEAT) INSTALLATION
The Cloud Q Belt Tensioner
uses CYBEX's SEAT
Technology to achieve a
quick and secure installation
every time, whether you
choose to use LATCH or
vehicle belts.
STEEL CHASSIS
The Steel Chassis is a continuous
metal frame integrated into the
Base from front to back. It
provides strengh, a secure
connection between the Infant
Carrier and Base. It also
absorbs crash forces from the
Load Leg.
16 15
Minimum 1 inch (2.5 cm)
CHILD SIZE REQUIREMENTS UNIQUE FEATURES OF THE CLOUD Q
EN