CYBEX gold CLOUD Q with SensorSafe, Руководство пользователя

Страница: 11 / 62

ADJUSTING THE SEAT
The seat has a headrest that automatically adjusts the harness
height without the need to rethread it. The car seat may be
adjusted up and down through eleven positions to perfectly fit
your baby.
The Cloud Q is shipped in the lowest position with the Infant
Insert already in position.
1. Unbuckle the Harness and Chest Clip
2. Place the child in the Infant Carrier, making sure
the buttocks are sitting in the very bottom of the
seat, with their crotch at the crotch strap.
3. Adjust for your baby by pulling up on the gray
plastic No Rethread Harness Adjuster while
sliding the seat up until the Harness Slots are even
with or slightly below your child's shoulders.
Regularly check for proper harness height as your child grows.
INFANT INSERT
The Infant insert will help provide a better harness fit for smaller
babies, as well as stability for the torso.
We recommend using the Infant Insert until the baby weighs about
11 lbs. (5 kg) or about 3 months.
SECURING THE CHILD
1. Loosen Harness by firmly pressing down on
the Harness Adjustment Button a while pulling
forward on both straps at shoulder level.
b
2. Press red button on Harness Buckle to release Tongues.
3. Separate Chest Clip and spread straps apart. Place child
in Infant Carrier in seated position making sure their
bottom is in the seat, and their back is fully supported.
4. Pull Harness straps over each arm onto shoulders
and around the hips. Make sure Buckle Pad and
Harness Buckle are between the legs.
Newborns tend to draw arms and legs close to their bodies. Gently extend
each limb to allow for proper Harness positioning. Be mindful of especially
sensitive areas (e.g. bellybuttons, circumcisions).
5. Buckle by inserting one Tongue at a time into the
Harness Buckle listening for an audible CLICK with each
one. Make sure Harness Straps are not twisted.
6. Connect the Chest Clip listening for an audible CLICK .
20 19
CLICK!
CLICK!
CLICK!
a
a
2
3
4
5
1
6
a
b
For proper use of the Infant Carrier, the Harness
shoulder straps MUST be AT or just BELOW your child's
shoulders.
MAKE SURE Harness straps are AT or just BELOW
child's shoulders. If not, refer to page 19.
ALWAYS check Harness Buckle to make sure it is
securely latched. Failure to fasten and tighten the
Harness system correctly with each use can result in
DEATH or serious injury.
USING THE INFANT CARRIER USING THE INFANT CARRIER
EN