32
Figure 7. Windows Security Alert
Step 2. Assign a valid IP Address to the ATS PDU.
With the appropriate device selected from the Equipment List, open
the Network Settings menu (shown in Figure 8) [Tools=>Device
Setup]. In the Device Network Setting Menu, enter a valid IP address,
subnet mask, and gateway address to setup the ATS PDU device.
Figure 8. Network Setting Menu (Device Setup)
Step 3. Authentication
Enter the user name and password of the ATS PDU at the
Authentication menu (shown in Figure 9).
Note:
The default username is “
cyber
” and the default password is “
cyber
”.
Figure 9. Authentication screen
Advanced Settings
Timeout Settings
The Timeout Setting (Shown in Figure 10). [Edit=>Timeout Settings] is used
to specify the wait time when scanning for network ATS PDUs. When there
are many devices on the local network, it may take extended periods of time
to locate all the devices. The timeout function is used to limit the search time.
The default setting is 3 seconds. Valid values are 3 to 60 seconds.
Figure 10. Timeout Setting
Appendix B-Power Device Network Utility