16
Installation Guide
Rear Mounting
Step 2. Cord Retention Tray Installation (optional)
Adjust the length of the Cord Retention Trays till the screw hole on
the Trays and ATS PDU are aligned. Attach the Cord Retention Trays
to the ATS PDU with the 8 supplied Cord Retention Tray Mounting
Screws. Tighten the Cord Retention Trays with the screw on it.
Step 3. ATS PDU Mounting
Use the provided Washers (4) and Screws (4) to secure the ATS PDU
to your existing rack system.
Note:
You may also use the screw sets provided by the rack to secure
the ATS PDU.
Step 4. Cable Ties (Optional)
Use the provided Cable Ties to fasten each cord to the Cord
Retention Tray.