CyberData 11307, Руководство по эксплуатации

Страница: 84 / 124

Installing the Singlewire InformaCast Indoor Intercom with Keypad
Configure the Audio Configuration Parameters
Operations Guide 931640A CyberData Corporation
77
2. On the Audiofiles page, enter values for the parameters indicated in Table 2-22 .
Note The question mark icon ( ) in the following table shows which web page items will be defined
after the Toggle Help button is pressed
.
Table 2-22. Audiofiles Configuration Parameters
Web Page Item Description
Available Space Shows the space available for the user to save custom audio files if they want to change the
message when the door or sensor is triggered.
0-9 The name of the audio configuration option is the same as the spoken audio that plays on
the board (24 character limit).
'0' corresponds to the spoken word “zero.”
'1' corresponds to the spoken word “one.”
'2' corresponds to the spoken word “two.”
'3' corresponds to the spoken word “three.”
'4' corresponds to the spoken word “four.”
'5' corresponds to the spoken word “five.”
'6' corresponds to the spoken word “six.”
'7' corresponds to the spoken word “seven.”
'8' corresponds to the spoken word “eight.”
'9' corresponds to the spoken word “nine.”
Dot Corresponds to the spoken word “dot.” (24 character limit)
Audio Test Corresponds to the message “This is the CyberData IP speaker test message...” (24
character limit)
Page Tone Corresponds to a simple tone used for beep on initialization and beep on page (24 character
limit).
Your IP Address Is Corresponds to the message “Your IP address is...” (24 character limit).
Rebooting Corresponds to the spoken word “Rebooting” (24 character limit).
Restoring Default Corresponds to the message “Restoring default” (24 character limit).
Ringback Tone This is the ringback tone that plays when calling a remote extension

(24 character limit).
Ring Tone This is the tone that plays when set to ring when receiving a call

(24 character limit).
Intrusion Sensor Triggered Corresponds to the message “Intrusion Sensor Triggered” (24 character limit).
Door Ajar Corresponds to the message “Door Ajar” (24 character limit).
Night Ring Specifies the ringtone for nightring. By default this parameter uses the same audio file that is
selected for the
Ring Tone parameter.
SIP Multicast Message This is the message that plays when multicast audio is initiated by the call button.
Blacklist Message The audio file that will play if a blacklisted security code is entered.
Click on the Browse button to navigate to and select an audio file.
The Play button will play that audio file.