Installing the Singlewire InformaCast Indoor Intercom with Keypad
Configure the Button Parameters
Operations Guide
931640A
CyberData Corporation
40
2. On the
Button Configuration
page, you may enter values for the parameters indicated in
.
Table 2-9. Button Configuration Parameters
Web Page Item
Description
Dial Mode
Enable Telephone Operation
Dial extensions like a normal telephone. Pressing the call button will start a dial tone.
Pressing the call button in a call will cancel a call.
Enable Cellphone Operation
Enter your extension and press the call button to start the call. Press the call button again
to cancel the call.
Enable Speed Dial Operation
In speed dial mode every button can be configured to call a different extension when
pressed.
Enable Security Operation
Security mode allows the user to secure the local or remote relay by requiring a code (up
to 8 digits) to be entered into the device's keypad. The security codes may be entered
within a phone call to a preset extension or independently. Security codes start with the
pound key (#) and will be recognized when the user stops pressing buttons or hits the
pound key again.
Security Mode Settings
Relay Activation Code
Activation code used to activate the relay when entered on a phone during a SIP call with
the device. Relay will be active indefinitely, or until the DTMF Relay Deactivation code is
entered. Enter up to 25 digits (* and # are supported).
Relay Deactivation Code
Code used to deactivate the relay when entered on a phone during a SIP call with the
device. Enter up to 25 digits (* and # are supported).
Allow Telephone Dialout
When enabled, the user will be able to use the keypad to dial while the device is in
Security mode.
Call Button
Dial this extension when the call button is pressed. Up to 64 characters.
ID
Type the desired Extension ID. Up to 64 characters.
Send Multicast Audio
When selected, the device will play an audio file to the specified multicast address and
port.
Note
: The keypad must be in Security mode to send Multicast Audio.
Multicast Address
The multicast address used for multicasting an audio file.
Multicast Port
The multicast port used for multicasting an audio file.
Repeat Message
The number of times to repeat the audio message to the remote endpoint. Enter a value
from 1-65536.
Speed Dial Settings
Speed Dial Timeout
The amount of time you must hold the button before it calls the configured extension.
When this is set to 0 the phone will dial the configured extension as soon as the button is
released.
Keypad 1
Dial this extension when the 1 key is pressed.
Keypad 2
Dial this extension when the 2 key is pressed.
Keypad 3
Dial this extension when the 3 key is pressed.
Keypad 4
Dial this extension when the 4 key is pressed.
Keypad 5
Dial this extension when the 5 key is pressed.
Keypad 6
Dial this extension when the 6 key is pressed.
Keypad 7
Dial this extension when the 7 key is pressed.
