CyberData 11307 Скачать руководство пользователя страница 43 | Manualshive

Страница: 43 / 124

background image

Installing the Singlewire InformaCast Indoor Intercom with Keypad

Configure the Device

Operations Guide

931640A

CyberData Corporation

36

InformaCast Address

Use this field to set the address of your InformaCast server. This will
override any InformaCast server addresses received via SLP or DHCP.

If using TFTP for configuration, simply enter an IP address (eg.
10.0.1.195) If using HTTP for configuration, enter the full URL to the path
that contains the configuration file.

Do not input the file name (e.g.http://10.0.1.195:8081/InformaCast/
resources/).If the HTTP protocol is not specified with

http://

, then TFTP

will be used.

Relay Settings

Activate Relay with DTMF Code

Activates the relay when the DTMF Activation Code is entered on the
phone during a SIP call with the device. RFC2833 DTMF payload types
are supported.

Relay Pulse Code

DTMF code used to pulse the relay when entered on a phone during a
SIP call with the device. Relay will activate for Relay Pulse Duration
seconds then deactivate. Activate Relay with DTMF Code must be
enabled. Enter up to 25 digits (* and # are supported).

Relay Pulse Duration (in seconds)

The length of time (in seconds) during which the relay will be activated
when the DTMF Relay Activation Code is detected. Enter up to 5 digits.

Relay Activation Code

Activation code used to activate the relay when entered on a phone during
a SIP call with the device. Relay will be active indefinitely, or until the
DTMF Relay Deactivation code is entered. Activate Relay with DTMF
Code must be enabled. Enter up to 25 digits (* and # are supported).

Relay Deactivation Code

Code used to deactivate the relay when entered on a phone during a SIP
call with the device. Activate Relay with DTMF Code must be enabled.
Enter up to 25 digits (* and # are supported).

Play tone during DTMF Activation

When selected, the device will play a tone out of the speaker upon DTMF
relay activation. The tone plays for the DTMF Activation Duration (in
seconds).

Activate Relay During Ring

When selected, the relay will be activated for as long as the device is
ringing. When Auto-Answer Incoming Calls is enabled, the device will not
ring and this option does nothing.

Activate Relay During Night Ring

When selected, the relay will be activated as long as the Nightringer
extension is ringing.

Activate Relay While Call Active

When selected, the relay will be activated as long as the SIP call is active.

Activate Relay on Button Press

When selected, the relay will be activated when the Call button is pressed.

Relay on Button Press Duration

The length of time (in seconds) during which the relay will be activated
when the Call button is pressed. Enter up to 5 digits. A

Relay on Button

Press Duration

value of 0 will pulse the relay once when the Call button

is pressed.

Activate Relay on InformaCast

Check this box to activate the relay while receiving a page from
Informacast. The relay will activate on a

start

command and deactivate on

a

stop

command.

Misc Settings

Device Name

Type the device name. Enter up to 25 characters.

Table 2-8. Device Configuration Parameters (continued)

Web Page Item

Description

«
...
41
42
43
44
45
...
»

Содержание 11307





























































































































Отзывы:

Нет отзывов

Похожие инструкции для 11307

Бренд: PAC Страницы: 9

Бренд: WaterLogic Страницы: 69

Бренд: Uconnect Страницы: 45

JBL CINEMA SB130

Бренд: Harman Страницы: 16

Pure Link 1300 Series

Бренд: lancer Страницы: 20

Бренд: Bentel Security Страницы: 4

VisionSound VS300

Бренд: PSB Страницы: 48

Бренд: Naked Страницы: 12

Бренд: Gladen Страницы: 2

StorageWorks DS-BA35X-MN

Бренд: Digital Equipment Страницы: 2

CONPROSYS CPS-MC341-DS1-111

Бренд: Contec Страницы: 71

BNI PNT-507-005-Z040

Бренд: Balluff Страницы: 2

Бренд: Jensen Страницы: 2

Бренд: Daewoo Страницы: 44

Бренд: EAW Страницы: 2

BPT KIT FREE LVC

Бренд: CAME Страницы: 4

Бренд: Daewoo Страницы: 35

Бренд: Nakamichi Страницы: 14

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды