CVE TouchOne CFS-1700, Инструкция по установке и эксплуатации, Страница: 17 / 22

32 33
Step 5 : Enter the year/month/day/date/time/minute/second consists of 13 digits
in sequence then press “#” button. Voice prompt saying “Function
installed” will be heard to indicate success of the time setting.
Date will be one digit number: “0” for Sunday, “1” for Monday “6” for
Saturday
Example) In case of 2:25:36 PM on July, 8, 2006 (Saturday)
06/07/08/6/14/25/36
2.9 Administration and User Finger Mode
This lock pre-set in the “Administration” mode. In this mode, only administrators
enrolled as a master finger or sub-master fingers can perform the programming
of this lock (enrolling/deleting fingerprint and programming and changing set
up) as the master finger or sub-master finger should be verified during the
programming process. If, however, you want to simplify the programming
process in enrolling/deleting fingerprint and programming and changing set up,
you can change to User finger mode where it does not require master or sub-
master finger to be verified for programming. Therefore anyone who has
knowledge on the programming of this lock can enroll/delete fingerprints and
program/change settings.
Note : You are highly recommended to use this lock in master finger mode to
keep programming or changing settings from manipulation by
unauthorized persons.
2.9.1 How to set User finger mode
Step 1 : Open the battery cover and press the “F” button in the back body of the lock
Step 2 : Pull up the sliding cover in the front body of the lock
(The fingerprint sensor will then turn on with a red light)
Step 3 : Place master finger or sub-master finger on the glass of the sensor to
verify (LED displays “FO-no”)
Step 4 : Press “13” and “#” button (LED displays “id”)
Step 5 : Enter “0” and then press “#” button. Voice prompt saying “Function
installed” will be heard to indicate success of User finger mode setting.
2.9.2 How to set Administrator mode
Step 1 : Open the battery cover and press the “F” button in the back body of the lock
Step 2 : Pull up the sliding cover in the front body of the lock
(The fingerprint sensor will then turn on with a red light)