22
23
Step 4
: Press “07” and “#” button (LED displays “id”)
Step 5
: Enter the ID number in one digit (“1”) and then press “#” button. Voice
prompt saying “Automatic closing mode” will be heard to indicate
success of Automatic Locking mode setting.
In this mode, this lock will be automatically locked within 5 seconds of the
door returning to its fully close position after having been opened
ID number for Temporary Unlock/Automatic Locking Mode
0 : Temporary Unlock Mode
1 : Automatic Locking Mode (Factory default Mode)
2.5 Temporarily Remove & Reinstate Fingerprints
An enrolled fingerprint can be temporarily removed without being deleted. It
can then be reinstated, as needed, without having to be re-enrolled. This
allows certain enrolled people to be granted or denied access for temporary
periods on a regular or irregular basis.
Note
: - The total number of fingerprints that can be temporarily removed from
the lock is limited to 20 at any point in time.
- Take care to note all temporary removals and reinstatements in the ID
Number and Fingerprint Record on page 19 of this manual.
To continue the Temporary Removal of other individual fingerprints, up to
the maximum limit of 20 at any point in time, just press “8” and “#”, and then
repeat Step 5.
2.5.1 Temporarily remove a single fingerprint from lock
Step 1
: Open the battery cover and press the “F” button in the back body of the lock
Step 2
: Pull up the sliding cover in the front body of the lock
(The fingerprint sensor will then turn on with a red light)
Step 3
: Place the master finger or the sub-master finger on the glass of the
sensor to verify (LED displays “FO-no”)