CVE TouchOne CFS-1700, Инструкция по установке и эксплуатации, Страница: 11 / 22

20 21
2.4 Temporary Unlock Mode
This lock is pre-set in “Automatic Locking Mode”. After being electronically
opened, it will automatically lock within 5 seconds of the door remaining in, or
returning to, its fully closed position.
However, you can set a “Temporary Unlock Mode” to enable free access
without the use of fingerprints or User Access Code. For example, this is useful
for storeroom and office doors that need to remainunlocked during office hours.
2.4.1 How to set the temporary unlock mode
Step 1 : Open the battery cover and press the “F” button in the back body of the lock
Step 2 : Pull up the sliding cover in the front body of the lock
(The fingerprint sensor will then turn on with a red light)
Step 5 : Enter “0” and then press “#” button. Voice prompt saying “Manual
closing mode” will be heard to indicate success of Temporary Unlock
Mode setting.
The automatic locking is disable, so the door will be left open (unlocked)
from the outside.
2.4.2 How to set automatic Locking mode
Step 1 : Open the battery cover and press the “F” button in the back body of the lock
Step 3 : Place the master finger or the sub-master finger on the glass of the
sensor to verify (LED displays “FO-no”)
Step 4 : Press “07” and “#” button (LED displays “id”)
Step 2 : Pull up the sliding cover in the front body of the lock
(The fingerprint sensor will then turn on with a red light)
Step 3 : Place the master finger or the sub-master finger on the glass of the
sensor to verify (LED displays “FO-no”)