Cutera truSculpt Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 66

Cutera truSculpt Скачать руководство пользователя страница 45

37

TRUSCULPT OPERATOR MANUAL

D1395, REV. K, 02/18

CAUTION

Prior to each use of the system, inspect the umbilical cable and
handpiece for any damage, excessive wear, or crimping that could
affect system performance or safe operation.

CAUTION

Do not place any unnecessary stress on the umbilical cable(s) (i.e.,
by pulling, tightly bending, or twisting handpieces).

CAUTION

Always verify that the treatment parameters are correct before

pressing the RF handpiece on/off button.

CAUTION

Do not leave the system in READY mode when not in use. Always
place the system in STANDBY between treatments or when
treatments are not being performed.

CAUTION

The system should always be in STANDBY mode until the
handpiece is safely positioned at the area to be treated.

CAUTION

Remove the RF handpiece from the treatment site when not in use,
even temporarily, and store in the handpiece cradle.

CAUTION

Do not obstruct the exhaust fan (located at rear of console).

CAUTION

Before each use, check that all indicator lights and audio signals are
functional. Ensure that the power cable plug is properly connected
to the console receptacle.

CAUTION

The truSculpt is designed to be operated exclusively as a unit. Only
use accessories provided by Cutera.

CAUTION

Cutera fully warrants the safety and efficacy of our devices when
used as intended for indications for which they are approved.
Cutera cannot verify the safety of single use accessories that have
been reprocessed or reused.

«
...
43
44
45
46
47
...
»

Содержание truSculpt



































































Отзывы:

Нет отзывов