Cutera truSculpt Скачать руководство пользователя страница 43 | Manualshive

Страница: 43 / 66

Cutera truSculpt Скачать руководство пользователя страница 43

35

TRUSCULPT OPERATOR MANUAL

D1395, REV. K, 02/18

S

afety and

R

egulatory

Introduction

The truSculpt, when properly used by trained personnel, is a safe and effective instrument for indicated
clinical treatments. Keep in mind that safe operation requires a thorough understanding of the system
and safety features as described in this operator manual.

Cutera does not make recommendations regarding the practice of medicine. Individual treatments should
be based on clinical training, clinical observation, and appropriate clinical endpoints.

Operational Training

The truSculpt system should be operated only by qualified personnel who have received appropriate
training in the use of the system. The user should be experienced in RF energy techniques and should
remain current with advances in RF energy procedures. Additional training on the use of the truSculpt
system from a Cutera representative is available.

WARNING

Do not allow untrained or unqualified personnel to use the system at
any time.

WARNING

Failure to follow all applicable instructions may result in serious
injury.

CAUTION

The system is intended solely for licensed practitioners trained in its
proper use.

«
...
41
42
43
44
45
...
»

Содержание truSculpt



































































Отзывы:

Нет отзывов