Custom Audio Electronics KPM150H, Руководство пользователя

Страница: 93 / 96

12.5 Setup
Mass Storage
It is possible to con fi gure the default parameters for printer and network setup by editing the “Setup.ini” fi le on the
printer Flash Drive.
You can enter the Flash Drive by
fi les sharing from Mass Storage (see par. 12.1).
However, the relative parameter should be enabled during the con fi guration process (see chapter 5).
After editing printer’s parameter, simply save the “Setup.ini” fi le to make the modi fi es activated.
The “Setup.ini” fi le is a con fi guration fi le that contains all the con fi gurable parameters listed in text format and divided
into some sections (indicated in square brackets).
The available values for every parameter, are listed after the parameter name. The value marked with the symbol ‘ *
’ is the default one.
To modify printer’s parameters, change the numeric value after the name of parameters. To set the parameter to the
default value, change the numeric value with the symbol D.
The “Setup.ini”
fi le permits the con fi guration of the following parameters:
[PRINT]
Printer Emulation: 0, 1* 0 = CUSTOM/POS
1 = SVELTA
Print Mode: 0*, 1 0 = Normal
1 = Reverse
Autofeed: 0*, 1 0 = CR disabled
1 = CR enable
Chars / inch: 0, 1* 0 = A=11 B=15 cpi
1 = A=15 B=20 cpi
Speed / Quality: 0, 1, 2* 0 = High Quality
1 = Normal 2 = High Speed
Paper Width: 0*, 1, 2, 3, 4, 5, 6, 7, 8, 9,
10, 11, 12, 13, 14, 15, 16,17
0 = 54 mm
1 = 52 mm
2 = 50 mm
3 = 48 mm
4 = 46 mm
5 = 44 mm 6 = 42 mm
7 = 40 mm
8 = 38 mm
9 = 36 mm
10 = 34 mm
11 = 32 mm 12 = 30 mm
13 = 28 mm
14 = 26 mm
15 = 24 mm
16 = 22 mm
17 = 20 mm
Paper Threshold: 0, 1*, 2, 3, 4, 5, 6 0 = 30 %
1 = 40 %
2 = 50 % 3 = 60 %
4 = 70 %
5 = 80 % 6 = 90 %
Notch/B.Mark Position: 0*, 1, 2, 3 0 = Disabled
1 = Bottom 2 = Transparent
3 = Top
Notch/B.Mark Threshold: 0, 1, 2*, 3, 4, 5, 6, 7 0 = 20 %
1 = 30 %
2 = 40 % 3 = 50 %
4 = 60 %
5 = 70 % 6 = 80 %
7 = 90 %
Notch Distance [mm]
Notch/B.Mark Min. Width:
0*, 1, 2, 3, 4, 5, 6, 7, 8, 9,
10, 11, 12, 13, 14, 15, 16,17,
18, 19, 20
0 = 0 mm
1 = 1 mm
2 = 2 mm
3 = 3 mm
4 = 4 mm
5 = 5 mm
6 = 6 mm 7 = 7 mm
8 = 8 mm
9 = 9 mm
10 = 10 mm
11 = 11 mm
12 = 12 mm
13 = 13 mm 14 = 14 mm
15 = 15 mm
16 = 16 mm
17 = 17 mm
18 = 18 mm
19 = 19 mm
20 = 20 mm
PaperEnd Buffer Clear: 0*, 1 0 = Disabled
1 = Enabled
12. ADVANCED FUNCTIONS
User manual
KPM150H 93