Custom Audio Electronics KPM150H, Руководство пользователя

Страница: 36 / 96

PRINT MODE
Printing mode:
Normal D = enables printing in normal writing way
Reverse = enables printing rotated 180 degrees
AUTOFEED
Setting of the Carriage Return character:
CR disabled D = Carriage Return disabled
CR enabled = Carriage Return enabled
NOTE: The parameter is printed only with CUSTOM/POS emulation enabled.
CHARS / INCH
Font selection:
200 dpi model 300 dpi model
A = 11 cpi, B = 15 cpi
D
A = 16 cpi, B = 23 cpi
A = 15 cpi, B = 20 cpi A = 23 cpi, B = 30 cpi
NOTE: CPI = Characters Per Inch
NOTE: The parameter is printed only with CUSTOM/POS emulation enabled.
SPEED / QUALITY
Setting of printing speed and printing quality:
Normal
High Quality
High Speed
D
PAPER WIDTH
Width of printing area:
20 mm 28 mm 36 mm 44 mm 52 mm
22 mm 30 mm 38 mm 46 mm 54 mm
D
24 mm 32 mm 40 mm 48 mm
26 mm 34 mm 42 mm 50 mm
PAPER THRESHOLD
Threshold value (in percent) for the recognition of the presence of paper by the paper
presence sensor:
30% 70%
40%
D 80%
50% 90%
60%
NOTCH/B.MARK
POSITION
Position of the notch alignment and choice of appropriate notch sensor:
Disabled
D
= the notch alignment is not performed
Bottom = the notch position is detected by the lower sensor (refl ection)
Trasparent = the notch position is detected by sensors both upper and lower (transpar-
ence)
Top = the notch position is detected by the upper sensor (refl ection)
NOTCH/B.MARK
THRESHOLD
Threshold value (in percent) for the recognition of the presence of notch by the notch
sensor:
30% 70%
40%
D 80%
50% 90%
60%
NOTE: If the “Notch Position” parameter is disabled, this parameter is not printed.
5. CONFIGURATION
36 KPM150H
User manual