Custom Audio Electronics KPM150H, Руководство пользователя

Страница: 83 / 96

The following fi gure shows a section of the device with the paper path and the distances (in mm) between the align-
ment sensor, the printing head and the cutter (cutting line), where
A = 26.5mm = distance between the cutting line (cutter) and the printing line (head) on paper
B = 39.7mm = distance between the the printing line (head) and the alignment sensor
CUTTER
PRINTING HEAD
SENSOR
A B
CUSTOM/POS EMULATION
To de fi ne the alignment point you need to set the printer parameters that compose the numerical value of the “Notch
Distance” parameter.
For example, to set a notch distance of 15mm between the notch and the alignment point, the parameters must be
set on the following values:
Notch Distance Sign
: +
Notch Distance [mm x 10]
: 1
Notch Distance [mm x 1]
: 5
Notch Distance [mm x .1]
: 0
The “Notch Distance” parameter, may be modi fi ed as follows:
• during the Setup procedure of the device (see cap.5)
• by modifying the Setup.ini fi le (see par.12.9)
• by driver (see par. 12.2)
• by using the $1D $E7 command (for more details, refer to the Commands Manual)
10. ALIGNMENT
User manual
KPM150H 83