Custom Audio Electronics KPM150H, Руководство пользователя

Страница: 54 / 96

PAPER
Type of paper
Thermal rolls, heat-sensitive side on outside of roll
Fan Fold thermal paper with notch
Paper width
from 20mm to 54mm (2mm step)
54mm (according to IATA BTP speci fi cations - resolution 740)
Paper weight from 80 g/m
2
to 180 g/m
2
Recommended paper
KANZAN KPO 460 and KP415
MITSUBISHI TL1767 and TL4000
External roll diameter
(7)
max Ø200 mm
Internal roll core diameter min 50 mm (+1 mm)
Core thickness 2 mm (+1 mm)
Paper end Not attached to roll core
Core type Cardboard or plastic
Minimum ticket length (8) 60 mm
CUTTER
Paper cut Total
Estimated life
(3)
1 000 000 cutter number
KPM150H ELECTRICAL SPECIFICATIONS
Power supply 24 Vdc ± 10%
Medium consumption
(6)
0.9 A
Standby consumption 0.09 A
POWER SUPPLY ELECTRICAL SPECIFICATIONS (cod.963GE020000003 - OPTIONAL)
Power supply voltage from 90 Vac to 264 Vac
Frequence from 47 Hz to 63 Hz
Current (output) 2.5 A
Power 60 W
ENVIRONMENTAL CONDITIONS
Operating temperature from 0°C to 50°C
Relative humidity from 10% to 85% (w/o condensation)
Storage temperature from -20°C to +70°C
Storage humidity from 10% to 90%
NOTES
(1)
: Electronic board.
(2)
: Only for printer models equipped with SD/MMC.
(3)
: Respecting the regular schedule of cleaning for the device components.
(4)
: “Veramono.ttf” and “Mono.ttf” are installed on printer fl ash disk. It is possible to install additional TrueType fonts
(see par. FONT MANAGEMENT).
(5)
: For further information refer to the command manual for managing chinese fonts.
(6)
: Referred to a standard CUSTOM receipt (L=10cm, Density = 12.5% dots on).
(7)
: For external rolls diameter higher to Ø100mm it’s recommended to use a paper pretensioning device.
(8)
: Referred to models without stop device ticket and ejecter/retention ticket. With these accessories installed is 75 mm.
7. SPECIFICATIONS
54 KPM150H
User manual