Curtiss-Wright R-NET OMNI2, Техническое руководство, Страница: 41 / 164

Curtiss-Wright | PG Drives Technology
SK81935-01
R-net Omni2 Technical Manual | Chapter 2 – Operation | 41
11.4.1.4 MAX SPEED INDICATOR
This displays the current maximum speed setting.
When the left-hand segment is illuminated, then the speed setting corresponds to the programmed minimum forward,
reverse and turning speeds. The indicator will never show a lower setting, i.e. the left-hand segment will always be fully
illuminated.
When all segments are fully illuminated, then the speed setting corresponds to the programmed maximum forward, reverse
and turning speeds.
11.4.1.5 ODOMETER
This displays the total distance the powerchair has travelled or the trip distance since the last reset. This selection is made in
the Settings Menu. Refer to the Settings Menu section for further details.
11.4.1.6 INHIBIT
If the powerchair is being inhibited from driving, then this red symbol will be flashing:
If the speed of the powerchair is being limited, for example, by a raised seat, then this orange symbol will be displayed:
11.4.1.7 LATCHED DRIVE
This symbol will be displayed if the control system is set for latched drive operation.