Curtiss-Wright R-NET OMNI2, Техническое руководство, Страница: 155 / 164

Curtiss-Wright | PG Drives Technology
R-net Omni2 Technical Manual | Chapter 10 – Warnings Summary | 155
SK81935-01
2.13 GLOBAL – EXTERNAL ON/OFF SWITCH DETECT
NOTE (HP, IN)
To maximize the error-checking capability, the resistors must be fitted as physically close as possible to the switch contacts.
2.14 GLOBAL – SLEEP 12V
NOTE (OP)
For prolonged periods of inactivity, for example overnight, the powerchair should be powered-down using the On/Off
Switch. This will prevent the control system from draining the batteries while asleep.
2.15 USER SWITCH DETECT
NOTE (HP, IN)
To maximize the error-checking capability, the resistors must be fitted as physically close as possible to the switch contacts.
2.16 9-WAY SID SWITCH DETECT
NOTE (HP, IN)
To maximize the error-checking capability, the resistors must be fitted as physically close as possible to the switch contacts.
2.17 USER CONTROL
NOTE (HP, IN)
It is not advisable to program the menu options, ‘Speed Adjust’ or ‘Profile Select’, if the Sequence method is being used with
Single Switch Scanner-Type SIDs.
NOTE (HP, IN)
When using a Single Switch Scanner-Type SID, it is advisable to program an appropriate scanning rate for the User Menu. This
is achieved using the programmable parameter, Menu Scan Rate. Operations of the User Switch whilst scanning through the
User Menu will change settings or enter the highlighted Profile or Mode.
2.18 FWD/REV AUTO TOGGLE
NOTE (HP, IN)
It is not possible to use the Fwd/Rev Auto Toggle function if latched driving is required, as there is a conflict in user command
logic. If Fwd/Rev Auto Toggle is set to On and latched drive is enabled in programming, then an error message ‘Bad Settings’
will appear.
2.19 POSITION 1 TO POSITION 16
NOTE (HP, IN)
It is possible to set items to appear multiple times in the menu.