Cuppone PZF/30, Руководство по эксплуатации и обслуживанию

Страница: 9 / 30

9
12
13
L I
M
A B
D
E N F
C H G
A
C M
Fig. 4
Basic notions
A
Display
Displays the
actual temperature
of the upper plate.
In the parameter setting phase it displays the
temperature set
for the upper plate or the
contact time
between the plates, pressing key (L).
B
Display LED
If the LED is lit, it means that the element of the upper
plate is heating up to reach the set temperature. If the
LED is off, the set temperature has been reached.
C
Display
Displays the
actual temperature
of the lower plate.
In the parameter setting phase it displays the
tempera-
ture set
for the lower plate.
With the machine OFF, pressing the ON/OFF key (M)
for a few seconds displays the “countdown” time (pro-
grammed switch-on).
D
LED display
If the LED is lit, it means that the element of the lower plate
is heating up to reach the set temperature. If the LED is off,
the set temperature has been reached.
E
+ key
Increases the
temperature of the upper plate
or the
contact time
of the plates. With the machine OFF, it al-
lows the display (A) and (C) of the
number of flattenings
carried out
.
F
- key
Decreases the
temperature of the upper plate
or the
contact time
of the plates.
G
+ key
Increases the
temperature of the lower plate
.
H
- key
Decreases the
temperature of the lower plate
.
I
Timer LED
Fixed LED: with the machine ON, it means that the
contact time of the plates is being set.
Flashing LED: with the machine OFF, it indicates that the
programmed switch-on function is active.
L
Timer key
With the machine ON, it allows setting the displayed
plate contact time in seconds (A).
M
ON/OFF key
Turns the machine on and off; with the machine off,
pressed for a few seconds, activates the “countdown”
function (programmed switch-on).
N
Emergency STOP button
When pressed, the red STOP
button switches the machine off
and prevents the lower plate
from raising in an emergency
(for instance if some foreign
object remains stuck between
the plates).
It must therefore be used
only when really necessary and not as an ON/
OFF switch to be used at the end of the work day.
If pressed, to restore the conditions of use, release the
button by turning it clockwise (the display will show the
message “PIF 197” which is NOT an alarm but indicates
the version of the board); then turn the machine back
on with the ON/OFF key (M) and restart the cycle as
usual, i.e. lowering the protection grille (1), to return the
plate to the starting position.
How to switch the appliance ON
Fig. 4
The machine is switched on by pressing the
ON/OFF (M) key
.
After a few seconds, the display:
(A)
displays the actual temperature of the upper plate
(C)
displays the actual temperature of the lower plate.
If the machine does not switch on, check whether the
emergency STOP button
; is locked; if so, unlock it by
turning it in a clockwise direction.
Ed. 0121 - 70702572 REV03 Pizzaform - Use and maintenance