background image

  

28 

       CUES Inc.

,

 Currahee Cutter User Manual  |   CK902

CUES Inc.

Currahee Cutter User Manual  |  CK902     

   

29

CUES STANDARD 12 MONTH WARRANTY

CUES warrants that all parts, components, and equipment manufactured by CUES shall be free from 
defects in material and workmanship under normal use and service for which it was intended for 
a period of twelve (12) months from the date of shipment of materials by CUES to the purchaser.  
CUES’ obligation under this warranty is limited, at CUES’ option, to replacing or repairing, free of 
charge, any defective materials returned, freight prepaid, to the CUES designated service facility.  For 
all warranty claims, the materials must be returned in accordance with CUES Material Return Policy. 

Major items of equipment, such as vehicles, generators, etc., furnished, but not manufactured by 
CUES, will be covered only under the warranty of the third party manufacturer of such equipment. 
Expendable parts, such as light bulbs, fuses, connectors, etc., are excluded from this warranty.

Purchaser must notify CUES of a breach of warranty not later than the last day of the warranty period; 
otherwise, such claims shall be deemed waived.

CUES does not warrant the materials to meet the requirements of the safety codes of any federal, 
state, municipal or other governmental or administrative jurisdiction.  Purchaser assumes all risk and 
liability whatsoever resulting from the use of its products, whether used singly or in combination with 
other products, machines or equipment.

This Warranty shall not apply to any materials, or parts thereof, which have; (a) been repaired or altered 
by anyone other than CUES without CUES’ written consent; (b) been subject to misuse, abuse, neg-
ligence, accident, or damage; (c) not been installed or operated in accordance with CUES’ printed 
instructions, or; (d) been operated under conditions exceeding or more severe than those set forth in 
the specifications of design tolerance of the equipment.

THIS WARRANTY AND THE OBLIGATION AND LIABILITIES OF CUES HEREUNDER ARE EXCLUSIVE 
AND IN LIEU OF (AND PURCHASER HEREBY WAIVES) ALL OTHER WARRANTIES, GUARANTEES, 
REPRESENTATIONS, OBLIGATIONS, OR LIABILITIES, EXPRESSED OR IMPLIED, ARISING BY LAW 
OR OTHERWISE, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR 
A PARTICULAR PURPOSE, REGARDLESS WHETHER OR NOT OCCASIONED BY CUES’ NEGLI-
GENCE.

CUES SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE RESULTING, DIRECTLY OR INDIRECTLY, 
FROM THE USE OR LOSS OF USE OF THE MATERIALS, OR FOR SPECIAL, INDIRECT, OR CON-
SEQUENTIAL DAMAGES, ECONOMIC LOSSES, LOSS OF PROFITS, LOSS OF BUSINESS, OR LOSS 
OF BUSINESS OPPORTUNITY.  Without limiting the generality of the foregoing, this exclusion from 
liability embraces Purchaser’s expenses for downtime or for making up downtime, damages to prop-
erty, and injury to or death of any persons.

CUES neither assumes nor authorizes any person (including employees, agents, or representatives of 
CUES) to assume for it any other liability, guarantee, or warranty in connection with the sale or use 
of the materials, and no oral agreements, warranties, or understandings exist collateral to or affecting 
this warranty.

This warranty shall not be extended, altered, modified, or waived except by a written instrument signed 
by CUES.

Содержание CURRAHEE







































Отзывы: