www.cuesinc.com
,
16
CUES Inc.
,
Currahee Cutter User Manual | CK902
CUES Inc.
,
Currahee Cutter User Manual | CK902
17
3
EQUIPMENT OVERVIEW, CONTROLS & SETTINGS
AIR/WATER ENABLE PUSHBUTTON
Air/Water Supplies are DISABLED
Air/Water Supplies are ENABLED
•
When the truck powers up, the Air/Water PCU is powered on, and the air/water supplies default to
the DISABLED state.
•
The pushbutton’s internal LED indicates whether the air/water supplies are able to be activated or
not.
NOTE: This applies regardless of the device controlling them (K2 PCU, Kangaroo Controller,
or otherwise).
•
Press the pushbutton to toggle between ENABLED and DISABLED.
•
If the air and/or water supplies are ON when the pushbutton is pressed (i.e., toggled to DISABLED),
they will automatically be turned OFF.
•
The Air/Water Enable Pushbutton controls the power source for both the air and water supplies.
Should the need arise, it can be used as an ‘Emergency Stop’ switch, since it physically disconnects
the power upstream from the electronic air and water power switches inside the Air/Water PCU.
LED OFF
LED ON
AIR/WATER
ENABLE
AIR
WATER
CURRAHEE
MODE
