www.cuesinc.com
,
16
CUES Inc.
,
Currahee Cutter User Manual | CK902
CUES Inc.
,
Currahee Cutter User Manual | CK902
17
EQUIPMENT OVERVIEW, CONTROLS & SETTINGS
3
Supply Power is OFF
Supply Power is ON – normal operation
Supply Power should be ON, but no voltage is detected at output, i.e., internal
switch remains open-circuit
Supply Power should be OFF, but voltage is detected at output, i.e., internal switch
remains short-circuit
AIR ONLY
Supply Power is OFF – low air pressure detected at regulator assembly
Supply Power is OFF – external controls (such as from the Air Motor switch on the
Kangaroo Cutter controller) must be turned off to reset the safety feature
OFF
BLUE
YELLOW
(flashing)
RED
(flashing)
WHITE
CYAN
(flashing)
AIR AND WATER LED INDICATORS
CURRAHEE MODE LED INDICATOR
Currahee Mode is OFF
Currahee
Mode
is
ON
Currahee Mode is OFF – no communication with the K2 PCU.
NOTE: this may be
caused by a disconnected serial cable or by the K2 PCU being powered down.
•
‘Currahee Mode’ is activated/deactivated automatically by the K2 PCU, based on the selected
equipment configuration.
•
When ‘Currahee Mode’ is ON, both the air and water supplies are independently controllable via
the K2 gamepad, but external controls (such as from the Air Motor switch on the Kangaroo Cutter
controller) will be ignored.
•
When ‘Currahee Mode’ is OFF, the air supply remains controllable via external controls (such as from
the Air Motor switch on the Kangaroo Cutter controller), but the K2 gamepad will be ignored.
•
If the air and/or water supplies are ON when the K2 PCU deactivates ‘Currahee Mode’, they will
automatically be turned OFF.
OFF
BLUE
RED