SERVICE
6
26
CUES Inc.
,
Currahee Cutter User Manual | CK902
CUES Inc.
,
Currahee Cutter User Manual | CK902
27
26
CUES Inc.
,
Currahee Cutter User Manual | CK902
CUES Inc.
,
Currahee Cutter User Manual | CK902
27
SERVICE
Cutter Assembly:
Basic electrical and mechanical knowledge and skill are required before attempting to test and repair
the Currahee Cutter system. Contact CUES Customer Service for assistance to determine the viability
of any internal repairs.
NOTE: Damage to the equipment during attempted internal repairs could result
in your warranty being voided!
Tools and supplies needed to service and repair the cutter:
A custom tool kit is available to perform maintenance and basic repairs to the cutter system. The tool kit
contains items such as wrenches, screwdrivers, brushes, greases, and thread locker. See the Currahee
Parts & Accessories Guide on the CUES website for more information.
Air Motors:
An instruction sheet is included with each air motor rebuild kit. Contact CUES Customer Service for
any questions regarding a rebuild.
Cutter Drive Belt:
Remove the wheels and place one side of the cutter on a raised surface so that the belt sprockets are
not contacting any surfaces. Use the gamepad to set the wheel speed to a slow setting and slowly rotate
the wheels while lifting upwards on the center of the belt. The belt will “walk” off of the sprockets.
Caution! Keep body parts away from the sprockets to avoid pinch points!
Stop the belt sprockets and
clean the sprockets of any residual debris. Place the new belt around the rear sprocket and partially
around the front sprocket. Slowly rotate the wheels while pressing downwards on the center of the
belt. The belt will “walk” onto the sprocket.
NOTE: Using tools or sharp objects to pry the belt on or
off could damage the belt.
