www.cuesinc.com
,
22
CUES Inc.
,
Currahee Cutter User Manual | CK902
CUES Inc.
,
Currahee Cutter User Manual | CK902
23
4
SYSTEM SETUP & INSTALLATION
a. Install the chosen air motor
style into air motor housing.
b. Align the circular notch in
the bottom of the air motor
to face the air inlet of the air
motor housing.
c. Prior to installation, apply a
couple drops of air motor oil
to upper bearing, lower
bearing, and on vanes
through holes in air motor.
d. Use anti-seize thread
lubricant on air motor
retaining nut and snug down
firmly.
e. Verify that air motor spins
freely.
4
4a & 4b
a. Install the chosen cutting bit
onto the air motor.
b. Threaded bits should be lightly
snugged down onto the shaft.
c. Collet style bits should be
tightened firmly.
5
5a
4d
