CSO A900 Скачать руководство пользователя страница 12

Страница: 12 / 64

INSTRUCTIONS FOR USE

Z8A9F9 | IFU323EN00

This document is the property of
CSO Costruzione Strumenti Oftalmici srl.
Any reproduction, even partial, it is prohibited.

10/60

Do not use the measuring prism beyond two years from the date

indicated on the production batch written on the package.

For patients affected by infective diseases always use the disposable

prisms.

It is forbidden to disinfect and reuse the disposable prisms.

It is forbidden to carry out any technical operation on the device that

is not recalled or described in the instructions for use.

It is forbidden to place the device in humid, dusty places or

environments subject to sudden temperature and humidity

variations.

It is forbidden to use the device outdoors.

The measurement precision is influenced by corneal rigidity

variations and changes. The rigidity can be due to differences in the

corneal thickness, to intrinsic structural factors or refractive corneal

surgery. keep these factors into account during the evaluation of the

intraocular pressure.

The device does not generate and does not receive any

electromagnetic interference if it is placed near other electrical

appliances. No preventive or corrective actions are required.

Содержание A900

































































Результаты поиска

Содержание A900

Отзывы:

Бренды по названию

Популярные бренды

CSO A900, Инструкция по эксплуатации

Результаты поиска

Содержание A900

Отзывы:

Бренды по названию

Популярные бренды