XCP-Gateway
Applying XCP-Gateway
User Guide
18
Version 01.00
User Guide
The
Program Settings
dialog (
Options
| Settings
) provides setting options which become effective
when a new configuration file is created. As to
Default document type
, the following options are
available.
Fig. 5-4:
Program Settings
dialog,
Default document type
setting options
… always ask
(default setting): The
Select document type
dialog is used.
CAN only (*.DBC)
: File type *.DBC is automatically selected for creating a new configuration file.
XCP-Gateway (*.A2L)
: File type *.A2L is automatically selected for creating a new configuration file.
See “xx-Scan Config Help” for further information.
5.2.2 Offline configuration
An offline configuration serves the purpose to summarize configuration-specific for saving it in an A2L
file, to transfer this file to a measurement module or to make it available for use in another configuration
tool like e.g. CANape or INCA at a later time.
NOTICE!
The following sections describe the steps for a configuration in offline mode.
See chapter 5.2.4 “Configuring measurement channels” and chapter 5.2.5 “Configuring
the device” for channel and module configuration, respectively.
Start up xx-Scan Config.
The xx-Scan program window opens.
Click on
File | New
(
Ctrl
+
N
).
The
Select document type
dialog opens.
Fig. 5-5:
Select document type
dialog
Select the option
XCP-Gateway (A2L)
for A2L file configurations and confirm by clicking on
OK
.
The
Tree view
window opens (here:
Config1.a2l – Tree view
).
Fig. 5-6:
Config1.a2l – Tree view
window
Move the mouse pointer over the window and right-click.
