CSM XCP-Gateway, Руководство пользователя, Страница: 13 / 40

XCP-Gateway
Product Description
Version 01.00
0
7 User Guide
3.1.2 Functional description LED indicators
3.1.2.1 Indicator LEDs “PC” and “ECAT”
The indicator LEDs PC and ECAT are lit or are flashing if an EtherCAT module or a computer (PC) has
been connected to the XCP-Gateway or when data is being transferred. Possible status categories are:
LED status Meaning
PC ECAT
100 % green 100 % green
Ethernet connection to PC or measurement
module has been established, no data transfer
50 %
green
50 % off
50 %
green
50 % off
Ethernet connection is active, i.e. data transfer is
running
off off
no device connected
Tab. 3-1: Indicator LEDs “PC” and “ECAT”
3.1.2.2 Status-LEDs “Gateway” and “Bus”
The status LEDs are indicating the operating status of the XCP-Gateway. Possible status categories
are:
LED status
Meaning
Gateway Bus
100 % green off
Device has been booted, waiting for connection
to be established, status “OK”.
100 % green 50 % orange 50 % red
Initialization of the EtherCAT measurement
modules connected has failed, check for
firmware update, if required.
90 %
green
10 % off off
Measurement module initialized and connected
to XCP master (measurement software or xx-
Scan Config), status “OK”.
50 %
green
50 % off off
XCP-Gateway has been selected by configu-
ration software, status “OK”.
10 %
green
90 % off
100 % green
Measurement successfully started, fault-free
function, status “OK”.
10 %
green
90 % off 50 % orange 50 % red
At least one measurement module is no longer
ready for measurement operation (e.g. after
reset)
off 100 % green
All measurement modules connected have been
successfully initialized, status “OK”.
off 50 % green 50 % off
Measurement module connected to EtherCAT
bus selected by configuration software, status
“OK”.
off 10 % red
90 %
green
At least one EtherCAT datagram has been lost
or has not (only) received a confirmation by the
requested module.
off
100 % red
Exceptional EtherCAT bus error
50 %
green
50 %
orange
off
XCP-Gateway runs firmware update, status
“OK”.
50 %
orange
50 % red off
Firmware update failed (e.g. due to transmission
error) Make a new start (switch off XCP-Gateway
before, if necessary).