16
Protecting Your Digital Assets
TM
CRU Ditto Shark User Manual
Choose “Client Mode” to connect to an existing wifi network or “Hot Spot Mode” to make the Ditto
Shark into a wifi hot spot.
Client Mode
Check “Status: Auto Start” if you want the Ditto Shark to connect to the specified wireless network
automatically.
To select the client mode’s networking mode, you can choose either “Client (DHCP)” or “Client
(Static IP) from the drop-down box underneath the MAC Address. “Client (DHCP)” automatically
configures the USB wifi network adapter to connect to a wifi network. “Client (Static IP)” allows you
to manually configure the connection.
Hot Spot Mode
Check “Status: Auto Start” if you want the Ditto Shark to begin broadcasting as a hot spot automati-
cally whenever a wifi adapter is plugged in.
The default settings below will work for most environments, with several exceptions.
Input your own key to ensure that your Ditto Shark remains secure.
You may be required to conform to your country’s laws and regulations regarding wireless radio fre-
quency usage. Select your two-digit country code from the “Regulatory Domain” drop down list, and
the Ditto Shark will limit the frequencies it may broadcast on to only those in the permitted range(s).
Do not connect the Ditto Shark to a wired network while it is configured as a hot spot. Doing so can
cause network conflicts and may disrupt network traffic.
SSID:
{Host Name}-wifi
Regulatory Domain:
Global
Band:
G - 2.4 GHz
Channel:
Auto
Broadcast:
Checked
Security:
WPA2 Personal
Key:
ditto123
Show Key:
Unchecked
IP Address:
10.10.10.1
Subnet Mask:
255.255.255.0
DHCP Server:
Enabled
DHCP Start Address:
10.10.20.100
DHCP End Address:
10.10.20.199
DNS Server:
Enabled
DNS Domain Name:
dittowifi.local
NTP Server:
Enabled
NAT Gateway:
Disabled
STOP!
STOP!
STOP!
